From 3-axis milling to 5-axis complex geometries and wire EDM — we manage the full range of CNC processes through our partner workshop network, with engineering review on every drawing before production starts.
Every process below is managed by our team — process selection, in-process inspection, and final reporting. Send us your STEP or DWG file and we'll tell you exactly how we'd make it.
3-axis and 4-axis vertical machining. Pocketing, contouring, drilling, tapping, and threading on parts up to 800mm.
Precision lathe work for shafts, bushings, pins, and cylindrical components. Live tooling for mill-turn operations in one setup.
Complex geometries in a single setup. Impellers, turbine blades, optical mounts, and multi-face parts with tight angular tolerances.
Ultra-precise cuts for hard materials and intricate profiles. Ideal for tooling, dies, and precision fits.
Full finishing management through vetted local partners — every batch verified before shipment.
Beyond machining — we assemble sub-components, press-fit bearings, apply thread inserts, and kit parts for your production line.
Reference values for planning your design. Exact capability for your specific part is confirmed with every quote.
| Process | Typical Tolerance | Best Achievable | Max Part Size (approx.) |
|---|---|---|---|
| CNC Milling (3/4-axis) | ±0.05mm | ±0.01mm | 800 × 500 × 300 mm |
| CNC Turning | ±0.02mm | ±0.005mm | Ø300 × 600 mm |
| 5-Axis Machining | ±0.03mm | ±0.01mm | 600 × 500 × 400 mm |
| Wire EDM | ±0.01mm | ±0.005mm | 500 × 400 × 300 mm |
| Surface Finish (Ra) | 3.2 standard | 0.8 achievable | — |
Tighter tolerances and larger envelopes are quoted case by case — send us the drawing and we'll confirm feasibility within 48 hours.
Our team reads your drawings like engineers, not traders. If something will be expensive, slow, or risky to make, you hear it from us before production starts — not after.
Wall thickness, undercuts, tolerance stacks, deep pockets — we flag issues that drive cost or risk, and suggest fixes before quoting.
Milling vs. turning vs. wire EDM — we pick the process that hits your tolerance and budget, not the one that's easiest for us.
Machinability, corrosion resistance, cost trade-offs across 35+ materials. If a cheaper grade meets your spec, we'll say so.
Get a capability check and a detailed quote within 48 hours — including feasibility feedback from our engineers.
Request a Quote →